01Specify the concentration and its acceptance limits

Yongchang’s catalogue describes this grade as nominal 68% nitric acid. The matching public SDS identifies dilute nitric acid (68%) and lists nitric acid at 68% by weight in its composition section. Treat that document description as product information, rather than a batch assay or an automatically agreed concentration tolerance.

In the enquiry, state whether your purchase requirement is a nominal target with an agreed tolerance or a particular minimum. Ask the supplier to confirm the wording in the sales specification. Do not borrow concentration guarantees, density values or impurity limits from a different grade or an unrelated report.

The 68% nitric acid product page brings together the current grade description and its available document samples.

InformationCurrent product referenceConfirm for the order
ProductNitric acid, HNO₃Required quality grade and intended use
Catalogue concentration68% nominalAcceptance range or minimum, by mass
Nitric acid CAS number7697-37-2Identity in the matching product documents
Catalogue control referenceGB/T 337.2—2014Applicable specification, methods and edition

Agree the applicable standard and edition in the sales specification. A catalogue reference does not replace the batch acceptance criteria.

Sources: [1][2][3]

02Make critical quality criteria measurable

The current 68% product page identifies concentration, nitrous acid, ignition residue and appearance among the quality checks. It does not publish a complete numerical acceptance table for this grade. Ask for the current sales specification and state any tighter limits required by your purchasing specification.

For each critical property, provide the parameter name, unit, acceptance limit and required method. If an approved technical specification is available, include it with the enquiry so the supplier can identify any differences. A description such as high purity is less useful than a measurable requirement.

Keep 68% and 98% documents separate. A numerical impurity limit shown for the concentrated grade should not be copied into a 68% order without confirmation. The same principle applies when comparing quotations from different suppliers.

Sources: [1]

03Request a document set for the exact grade

The Yongchang 68% page provides redacted public examples of the SDS, hazard-classification report and safety label. They identify the document types available for review. Request complete, current versions appropriate to the supplied product and route; the public examples are not the complete document set for receiving or handling a shipment.

Ask separately for the batch COA or agreed test report. An SDS communicates safety information, while a batch report records test results for identified material. Ensure the product description on the quotation, specification, report and shipment records is consistent.

For the distinction between a limit and a measured result, see the worked examples in how to read a fertilizer COA.

  • Agreed sales specification and test methods
  • Current complete SDS for the supplied 68% grade
  • Batch COA or agreed analysis report
  • Applicable classification and shipment documents
  • Current package label and any destination-language requirements

Sources: [1][2]

04Review packaging against the receiving arrangement

The catalogue offers jerrycan, drum, IBC and ISO tank formats for packaging review. Availability of a named format does not establish the material, closure, capacity or net fill for your particular order. Ask for these details in the written offer.

Describe how the consignment will be received and unloaded, including site restrictions and available equipment. Have the responsible personnel review the current SDS and proposed arrangement. A photograph of an earlier package is useful context, but does not approve a container or unloading method for another shipment.

Use the packaging and delivery checklist to record the net quantity, receiving constraints and commercial scope alongside the technical specification.

Sources: [1]

05Send the technical and commercial requirements together

Include the product, nominal concentration, required tolerance, quality criteria, quantity and destination country and port. Add your preferred packaging, delivery window and any document requirements. This lets the supplier review the order as a whole rather than quote a concentration without a delivery basis.

Yongchang states a minimum order of one full container load. Confirm the actual net loading weight for the chosen packaging and route. Ask for dispatch and arrival estimates separately, and record which freight and destination charges the offer includes.

Sources: [4]

Related products

Sources & product documents

  1. Yongchang — 68% nitric acid and product documents

    Nominal concentration and the corresponding document samples.

  2. 68% nitric acid — redacted SDS sample (PDF) (opens in a new tab)

    Issued 11 August 2026. English identification and composition appear on PDF pages 12 and 14; request the current complete SDS for use.

  3. National standard registry — GB/T 337.2-2014 (opens in a new tab)

    Official record for Dilute nitric acid for industrial use; listed as current when checked on 13 November 2026.

  4. Yongchang — Shipping & logistics

    One FCL minimum order, port options and shipment-specific loading arrangements.